Scope of Application

【Operating Instructions】

This machine is suitable for testing the elastic recovery performance of fabrics under two modes: constant load and constant length.

YG004 Fabric Elastic Recovery Performance Tester

[Scope of Application]This machine is suitable for testing the elastic recovery performance of fabrics under two modes: constant load and constant length.

[Compliance Standards]ASTM D3107.

[Working Principle]

• Constant Load Method: The upper end of a specimen with specified dimensions is clamped in the upper clamp, and a weight of a certain mass is suspended from the lower end. After 4 loading cycles, the recovery performance of the specimen is tested.

• Constant Length Method: The upper and lower ends of a specimen with specified dimensions are clamped in the upper and lower clamps, respectively. The lower clamp is moved to stretch the specimen to a certain length, held for a specific duration, and then the recovery performance of the specimen is measured.

[Technical Specifications]

1. Specimen Size: 65mm x 560mm

2. Clamp Jaw Width: 60mm

3. Load: 3LB / 4LB (±1%)

4. Hanging Rod: Outer Diameter: 6mm

5. Dimensions (W x D x H): 70 x 120 x 50 cm

6. Weight (Approx.): ≈ 30 Kg

[Main Accessories]

• Steel Ruler: 100cm

• Weights: 3LB and 4LB (1 piece each)