Scope of Application

【Operating Instructions】

Used to determine the biaxial tensile deformation and strength of various materials, including fabrics, geotextiles, canvas, and membrane materials.

YS012S Geosynthetic Biaxial Tensile Testing System

Applicable Scope:
Used to determine the biaxial tensile deformation and strength of various materials, including fabrics, geotextiles, canvas, and membrane materials.

Instrument Features:

1. The overall structural design is concise and practical, with every component rigorously selected.

2. Capable of performing biaxial tensile tests for both instantaneous and long-term creep.

3. Can achieve stress and strain loading at any arbitrary ratio in two directions.

4. Designed with a "cross-shaped" biaxial tensile method to accurately reflect the material's biaxial受力 (受力在英文中通常表达为受力状态或应力状态，这里结合语境译为 stress state) state.

5. Accommodates large specimen sizes and long tensile strokes, enabling large deformation tests.

6. High testing efficiency with long-term reliability and stability.

7. Drive system utilizes servo drive motors and drivers.

8. Transmission structure adopts imported brand ball screws and precision sliders.

9. Equipped with multiple protection mechanisms; modular design facilitates upgrades and future maintenance.

10. Expert and software analysis system with support for online communication.

11. Long strain range; with a clamping distance of 100mm, biaxial elongation can reach up to 300%.

12. Features an automatic pre-tension application function.

13. Smooth operation with low noise.

14. Simple, well-crafted, and precisely machined fixture design for easier replacement.

15. The outer casing is treated with an electrostatic spraying process.

Technical Parameters:

1. Working Mode: Microcomputer control, full computer testing, and data processing.

2. Working Method:
   A: One direction clamp remains stationary while the other direction clamp performs biaxial tensile.
   B: Clamps in both directions perform simultaneous biaxial tensile.

3. Sampling Frequency: 100 times/second.

4. Maximum Capacity: 10,000N (Optional capacities: 100N, 1,000N, 2,500N, 5,000N, 30,000N, 50,000N).

5. Force Measurement Range: 1% - 100%.

6. Force Measurement Accuracy: ≤ ±0.2% F·S (Full Scale).

7. Tensile Speed: 0.1 - 600 mm/min.

8. Effective Stroke:
   X-axis: 200mm ± 0.01mm on each side (customizable);
   Y-axis: 200mm ± 0.01mm on each side (customizable).

9. Clamping Width: ≤ 60mm.

10. Power Supply: AC 220V ± 10%, (50Hz ± 1%), 2Kw.

11. External Dimensions: 1260mm × 620mm × 1800mm.

12. Weight: 460Kg.