YS705Y Clean Fabric Particle Generation Tester
Scope of Application
【Operating Instructions】
- The clean fabric particle generation test bench is used to measure the number of particles dispersed by clean fabrics during simulated movement. This simulated movement involves tumbling the dry fabric inside a rotating drum. Within a specified time and sampling volume, the number or concentration of dispersed particles is measured. This measured value is then compared with standard grades to evaluate the classification of the clean fabric.
YS705Y Clean Fabric Particle Generation Tester
[Scope of Application]The clean fabric particle generation test bench is used to measure the number of particles dispersed by clean fabrics during simulated movement. This simulated movement involves tumbling the dry fabric inside a rotating drum. Within a specified time and sampling volume, the number or concentration of dispersed particles is measured. This measured value is then compared with standard grades to evaluate the classification of the clean fabric.
[Compliance Standards]GMP Static, GMP Dynamic, ISO14644-1
[Instrument Features]
Provides a complete validation manual for easy compliance with pharmaceutical regulations.
Built-in thermal printer for data printing, settings, sampling, display, and printing.
Reduces operator error, facilitates long-term data archiving, and supports long-term data storage.
Suitable for clean garment testing and environmental monitoring.
Features audit trails, electronic signatures, and storage of personnel operation records. Allows pre-setting of sampling areas, grade standards, and particle size selection. Includes GMP and ISO14644-1 cleanliness standard judgments.
Calibrated according to JJF1190-2008 and GB/T6167-2007. Features a 7-inch touch screen for simplified operation.
Complies with GB/T2429 for anti-static clean fabrics.
[Technical Specifications]
Drum Speed: 1~20rpm adjustable
Counter Model: SX-L310T
Sampling Flow Rate: 28.3L/min ±5% (1.0 CFM)
Particle Size Channels: 0.3μm, 0.5μm, 1μm, 3μm, 5μm, 10μm
Laser Source: Laser Diode
Imported Fan: Stable for continuous operation, energy-saving, and environmentally friendly.
Calibration Standard: JJF1190-2008, GB/T6167-2007
Repeatability Relative Error: Under identical measurement conditions, the repeatability of continuous particle concentration measurements is <10%.
Particle Size Distribution Error: ±30% for 0.5μm and 5μm size ranges.
Particle Concentration Indication Error: When the particle counter is in normal working condition, the indication error for 0.5μm particle concentration does not exceed ±30% FS.
Max Sampling Concentration: 35,000 particles/liter
Self-Cleaning Time: ≤10min (Count is zero for 3 consecutive times within 10 minutes, 95% confidence level)
Sampling Time: User-defined (1~14400 seconds)
Sampling Delay: User-defined (1~255 seconds)
Sampling Points: 2-9
Sampling Frequency (Location): 2~50
Working Time: 6 hours of continuous testing on a full charge
Screen Display: Color 7-inch touch screen
Printing Method: Built-in thermal printer (Thermal paper: 57xD40)
Charging Power: AC (220V/50Hz)
Built-in Lithium Battery: DC 14.8V 36Ah
Charging Adapter: Input 100V-240V 2.5A, Output 16.8V 5A
Battery Charging Time: 6~8 hours
Air Cleanliness Level Judgment Standard: ISO14644-1, GMP Dynamic, GMP Static
Clean Garment Judgment Standard: GB/T2429 Anti-static Clean Fabric
Temperature & Humidity: Optional
Data Communication Interface: USB
Operating Environment: Temperature 040℃, Relative Humidity 1070% RH. Storage Environment: Temperature -3045℃, Relative Humidity 090% RH.
Drum Dimensions: 570x520x600mm (LxWxH)
Counter Dimensions: 315x320x310mm (LxWxH)
Material: SUS304 Stainless Steel
Power: ≤0.5KW
[Application Scenarios]
Cleanliness testing of clean rooms (zones).
Routine maintenance monitoring of clean rooms in electronics and pharmaceutical factories.
Measurement of airborne suspended particles.
Cleanliness level testing of clean garments.
