Scope of Application

【Operating Instructions】

This product is suitable for the sample preparation of geosynthetics. It is mainly used for preparing specimens required for testing geotextiles, geomembranes, composite geotextiles, and composite geomembranes. It can meet the preparation needs for the vast majority of geosynthetic test samples, such as wide-width tensile, strip tensile, trapezoid tearing, and CBR puncture strength tests for mechanical properties; as well as apparent opening size, vertical permeability coefficient, hydrostatic pressure resistance, and permeability coefficient tests for hydraulic properties.

YS068 Universal Sample Cutting Machine for Geosynthetics

Applicable Scope:
This product is suitable for the sample preparation of geosynthetics. It is mainly used for preparing specimens required for testing geotextiles, geomembranes, composite geotextiles, and composite geomembranes. It can meet the preparation needs for the vast majority of geosynthetic test samples, such as wide-width tensile, strip tensile, trapezoid tearing, and CBR puncture strength tests for mechanical properties; as well as apparent opening size, vertical permeability coefficient, hydrostatic pressure resistance, and permeability coefficient tests for hydraulic properties.

Instrument Features:

1. Dual Working Modes: Two distinct working modes to suit the preparation needs of different samples.

2. Pneumatic-Hydraulic Combined Pressurization: Ensures uniform pressure without damaging the specimen or the cutting edge.

3. Comprehensive Safety Protection: Features infrared induction, dual-hand button switches, cutter mold installation status indicator, lower template installation status indicator, on-screen soft switches, and an emergency stop button.

4. Flexible Air Supply: Can be connected to an independent air compressor or a centralized air supply system.

5. Adjustable Pressure: Pressurization intensity can be arbitrarily adjusted to meet the needs of different samples.

6. Compatible with DM Series Cutters: Can be paired with DM series cutting dies to prepare samples of various sizes and shapes.

Technical Parameters:

1. Display: 7.8-inch touch screen with Chinese menu

2. Sampling Pressure: Maximum working pressure of 10 tons; working air source pressure not less than 0.5 MPa

3. Sample Preparation Mode: Pneumatic-hydraulic combined cylinder pressurization, ensuring uniform cutting edge and safety

4. Cutting Stroke: 100 mm

5. Sample Thickness: 20 mm

6. Cutter Sizes: Ø10 cm, 10×10 cm, Ø220 mm, 300 mm × 200 mm, Ø200 mm, 200 mm × 75 mm, Ø300 mm (Optional)

7. Cutting Time Adjustment: 0 - 60 s

8. Power Supply: AC 220V, 50Hz

9. External Dimensions: 800 × 700 × 1450 mm (L × W × H)

10. Weight: 180 kg