Scope of Application

【Operating Instructions】

The infusion set leak negative pressure tester is suitable for seal leakage testing of single‑use sterile infusion sets. By testing the sealing performance of infusion sets, it is an ideal testing instrument for medical device manufacturers and is widely used in various testing institutions.

**YS-SLN-10 Infusion Set Leak Negative Pressure Tester**  

**【Scope of Application】**  

The infusion set leak negative pressure tester is suitable for seal leakage testing of single‑use sterile infusion

 sets. By testing the sealing performance of infusion sets, it is an ideal testing instrument for medical device 

manufacturers and is widely used in various testing institutions.  

**Test Principle:** Fill the infusion set sample with degassed distilled water, connect it to the vacuum test port 

of the instrument, block the other outlets, place it in a 40°C water bath, and apply a negative pressure of –20 kPa 

for 15 seconds to check whether air enters the infusion set.  

**【Applicable Standards】**  

GB 8368‑2018 “Infusion sets for single use — Gravity feed type”  

**【Instrument Features】**  

1. Intelligent embedded operating system with a user‑friendly interface — what you see is what you get.  

2. 5‑inch color LCD screen with high‑definition display.  

3. High‑quality metal buttons for start and stop, making operation more convenient and faster.  

4. Preset test vacuum level and holding time ensure accurate test data.  

5. Uses SMC pneumatic system components — stable and reliable performance.  

6. Automatic constant‑pressure air replenishment further ensures testing under preset vacuum conditions.  

7. Standard configuration includes a micro‑printer for printing test data at any time.  

8. Standard RS232 data communication interface for convenient data export and external connection.  

**【Technical Parameters】**  

1. **Vacuum pressure range:** 0 – –90 kPa  

2. **Sensor accuracy:** Class 0.25  

3. **Test time range:** 1 second – 999,999 seconds (arbitrarily settable)  

4. **Air source pressure:** ≤ 0.8 MPa (air source must be provided by the user)  

5. **Vacuum interface:** 6 mm polyurethane tubing  

6. **Test fixtures:** Custom interfaces, fixing devices, and other supporting parts available on request  

7. **External dimensions:** 360 mm (L) × 420 mm (D) × 180 mm (H)  

8. **Power supply:** 220 V AC, 50 Hz  

9. **Net weight:** 8 kg  

**【Product Configuration】**  

**Standard configuration:** Main unit, micro‑printer, pressure regulating valve, anti‑backflow tank, connecting tubing.