YS-9010B Computer Servo Tensile Testing Machine (with Extensometer)
Scope of Application
【Operating Instructions】
- **YS-9010B Computer Servo Tensile Testing Machine (with Extensometer)****【Scope of Application】**The computer servo tensile testing machine is widely used for mechanical property testingof rubber, films, FPC, adhesive tapes, nonwovens, cast films, carrier tapes, resins,plas
**YS-9010B Computer Servo Tensile Testing Machine (with Extensometer)**
**【Scope of Application】**
The computer servo tensile testing machine is widely used for mechanical property testing
of rubber, films, FPC, adhesive tapes, nonwovens, cast films, carrier tapes, resins,
plastics, metal bars, metal tubes, metal sheets, metal profiles, and composite materials.
With appropriate fixtures, it is also suitable for tensile, compression, peel, shear, tear,
bending, metal weld strength, and rivet strength tests on various finished products.
It can print multiple data items and provide graphical output comparisons based
on different data sets, offering high control accuracy and simple operation. The modular
design provides a wide variety of accessories with flexible configuration.
The computer servo tensile testing machine is mainly used for tensile, compression,
bending, and other mechanical property tests on various materials. It can also
perform multi‑cycle tests such as constant stress, constant strain, creep, relaxation,
axial, and radial tests. According to GB, JIS, ASTM, DIN and other standards, it
can automatically determine parameters including tensile strength, yield strength,
elongation, stress at given elongation (any percentage), elongation at given
stress (any percentage), modulus of elasticity, elongation at break, peel strength
(including 90° and 180° peel), flexural modulus, tear strength, adhesion strength, shear strength, etc.
**【Applicable Standards】**
GB, JIS, ASTM, DIN, and other standards
**【Product Features】**
1. Uses high‑precision full closed‑loop control software for displacement, speed, and load.
2. **Drive:** High‑precision ball screw drive — high efficiency, high rigidity, low deformation, low noise.
3. **Motor:** Japanese Panasonic servo motor drive — provides stable, widely adjustable speed drive with high speed, low vibration, and high‑speed positioning.
4. **Crosshead material:** Made of 45# die steel, ground — parallelism error ≤ 0.5 mm, high rigidity.
5. **Guidance:** Two‑column guidance using South Korean chrome steel rods — excellent wear resistance and coaxiality.
6. **Displacement measurement:** Japanese LINE high‑pulse (2500 r/p) photoelectric encoder — resolution up to 0.001 mm.
7. **Force measurement:** American TRANSCELL precision tension/compression explosion‑proof load cell — accuracy 0.03% F.S.
8. **Control board:** Self‑developed 32‑bit ARM chip for measurement and control — superior to industry 16‑bit DSP technology, high resolution 1/500,000.
9. **Powerful software:** Suitable for testing different materials and can simultaneously execute different standards, including international standards (with data processing functions for various standards). Units: N, kN, g, kgf, lb, cN can be interconverted. The test software, fully designed according to test standards, is powerful. Test curves can be enlarged, clearly showing the amount, speed, and smoothness of data acquisition, reflecting the overall processing capability of the hardware and software.
10. **Test reports and curves:** Precise curves, editable test reports, high‑density test curves indicate fast test sampling frequency — a clear advantage compared to competitors.
**【Technical Specifications】**
*(To be provided separately)*
model | YS-9010 series 5KN | ||
YS-9010B | YS-9010A | ||
Capacity Selection | 5、10、20、30、50、100、200、300、500N 1、2、3、5kN One range included as standard; three ranges optional. | ||
accuracy class | <1KN：0.1 ≥1KN:0.25 | <1KN：0.25 ≥1KN:0.5 | |
test range | 0.2%～100%FS（full range） | ||
Indication Error of Test Force | Model B within ±0.1%、±0.25%、±0.5% （different range） / Model A within ±0.5%（different range） | ||
Resolution of Test Force | Model B maxmam force 500000 / Model A maxmam force200000， No automatic range switching; resolution remains constant across the entire range. | ||
Indication Error of Displacement | Displacement Parameters Model B within ±0.2% of the set value. / Model A within ±0.5% of the set value. | ||
| Displacement Resolution Model B 0.015μm / Model A 0.1μm | ||
| Stress Control Speed Range Model B 0.005～5%FS/s /Model A 0.05～5%FS/s | ||
Stress Control Speed Accuracy | Model B:When the speed is < 0.05% FS/s, the tolerance is within ±1% of the set value. When the speed is ≥ 0.05% FS/s, the tolerance is within ±0.5% of the set value. Model A:When the speed is < 0.1% FS/s, the tolerance is within ±2% of the set value. When the speed is ≥ 0.1% FS/s, the tolerance is within ±0.5% of the set value. | ||
| Strain Control Speed Range Model B 0.005～5%FS/s / Model A 0.05～5%FS/s | ||
Strain Control Speed Accuracy | Model B: When the speed is < 0.05% FS/s, the tolerance is within ±1% of the set value. When the speed is ≥ 0.05% FS/s, the tolerance is within ±0.5% of the set value. Model A: When the speed is < 0.1% FS/s, the tolerance is within ±2% of the set value. When the speed is ≥ 0.1% FS/s, the tolerance is within ±0.5% of the set value. | ||
Displacement Control Speed Range | Displacement Control Speed Range Model B 0.001～500mm/min /Model A 0.01～500mm/min | ||
Displacement Control Speed | Displacement Control Speed Accuracy Model B ±0.2%of setting value / Model A ±0.5%of setting value | ||
| Force Control Speed Relative Error Model B +1% of setting value / Mpodel A +2%of setting value | ||
| Constant Stress, Constant Strain, Constant Displacement Control Range Model B 0.5%～100%FS / Model A 1%～100%FS | ||
| Constant Stress, Constant Strain, Constant Displacement Control Model B: When the set value is ≥ 10% FS: within ±1% of the set value When the set value is ≥ 10% FS: within 0.1% of the set value Model A: When the set value is ≥ 10% FS: within ±2% of the set value When the set value is ≥ 10% FS: within ±0.5% of the set value | ||
| Dimensions (L×W×H) 500×600×1500mm/1650mm | ||
Performance | Test Space (excluding fixtures) 850/1200mm Or Customized | ||
| Fixture Center to Column (distance) 70mm(Or Customized) | ||
Power input | 220V 50Hz，±10% | ||
Power | 0.4KW | ||
weight | 95KG | ||
