YS1201 UV Aging Test Chamber
Scope of Application
【Operating Instructions】
- The YS1201 UV Aging Test Chamber is used for light resistance, weather resistance, and photo-aging tests on various geosynthetics. It conducts specimen exposure tests in a controlled environment fluorescent UV lamp climate chamber. By simulating and intensifying environmental factors such as light, heat, humidity, and rain that cause aging damage in natural climates, and through accelerated testing under long-term exposure conditions, it obtains results on the material's weather resistance performance.
YS1201 UV Aging Test Chamber
[Scope of Application]The YS1201 UV Aging Test Chamber is used for light resistance, weather resistance, and photo-aging tests on various geosynthetics. It conducts specimen exposure tests in a controlled environment fluorescent UV lamp climate chamber. By simulating and intensifying environmental factors such as light, heat, humidity, and rain that cause aging damage in natural climates, and through accelerated testing under long-term exposure conditions, it obtains results on the material's weather resistance performance.
[Compliance Standards]JTG E50 T1164; GB/T 14522-93 "Method for Artificial Climate Accelerated Testing of Plastics, Coatings, and Rubber Materials for Mechanical Industrial Products"; GB/T 16422.3-1997; ISO 4892-3:1994 "Plastics - Methods of exposure to laboratory light sources", etc. Note: Meets the above standards, but is not limited to them.
[Instrument Features]
Automatic control of light, condensation, and circulation, with real-time monitoring and display.
Light temperature: RT+10℃ to 70℃
Condensation temperature: 50℃
Condensation method: Steam humidification condensation
Temperature uniformity: ±3℃
Irradiance intensity: 0.55W/m²
Light/Condensation cycle: 0-9999h 59min adjustable (e.g., 4H/4H or 8H/8H)
Lamp center distance: 70mm
Distance between specimen and lamp plane: 55mm
UV lamp: UV-A340 or UV-B313 (Optional)
UV wavelength: (UVA) 315-400nm; (UVB) 280-315nm
Lamp life: 1600-1800H
Standard specimen size: 75×150mm or customized according to customer requirements (Can hold 21 samples)
Control system: Touchscreen controller, real-time monitoring with a friendly interface, simple and easy to use.
Power rating: AC220V 50HZ 4.7KW
Structure and material: Internal dimensions: D450 × W1165 × H500mm External dimensions: D500 × W1300 × H1400mm Inner chamber material: SUS304# stainless steel plate Outer shell material: SUS304# stainless steel plate
Specimen clamp material: SUS304 stainless steel plate
Imported lamps: Two rows, total 8 lamps, 40W each
Water source and consumption: Clean water or distilled water 8 liters/day (Customer supplied)
Control system: Color touchscreen, real-time display of irradiation, condensation, irradiance intensity, and lamp life accumulation. Chinese input method, fully automatic operation.
